Obvod: AT24C01C [UDFN8]
Výrobca: Atmel
Popis čísla dielu pre toto zariadenie:
Nabehnutím kurzora zvýraznite konkrétnu sekciu| AT | Atmel | |
| XXXXX | Family Descriptor | 24C, 24HC = 2 wire serial EEPROM 24CS = 2 wire serial EEPROM with Software Write Protection or with 128-bit serial number feature 24MAC = 2 wire serial EEPROM with Extended Memory (128-bit Serial Number, EUI-48/64 Value) 24RF = 2 wire serial EEPROM with RFID Interface 30TSE = 2 wire serial EEPROM with Temperature Sensor 34C = 2 wire serial EEPROM with Software Write Protection |
| XX | Option | Blank 00 = Jedec (JC42.4) SO-DIMM SPD + TS compliant 4 = EUI-48 standard 6 = EUI-64 standard 75 = Pin and Software Compatible to Industry-Standard LM75-Type Devices |
| XXX | Density | 01, 11 = 1kbit 02 = 2kbit 04 = 4kbit 08 = 8kbit 16 = 16kbit 21 = 1kbit 32 = 32kbit 64 = 64kbit 128 = 128kbit 256 = 256kbit 512 = 512kbit 1024 = 1Mbit M01 = 1Mbit |
| X | Version | Blank A = A-version B = B-version C = C-version D = D-version |
| X | Package Width | Blank N = Narrow (150mil) W = Wide (208mil) |
| XX | Speed Option | Blank 10 = 10 ms |
| X | Package Type | P = Plastic DIP S = SOIC T = TSSOP M = MSOP Y1 = MAP8 Y6 = MLP8 (2x3mm) SS = JEDEC SOIC X = TSSOP MA = UDFN8, MLP8 (2x3mm) ME = XDFN ST = SOT23 C = VFBGA XM = 8-lead, 3 x 3mm MSOP |
| X | Package Device Grade and Temperature Range | C = Commercial temperature range I = Industrial temperature range H = Green, NiPdAu lead finish, Industrial temperature range U = Green, matte Sn lead finish, Industrial temperature range P = Green, NiPdAu lead finish, Automotive temperature range 9 = Automotive temperature grade 3 |
| XX | Operating Voltage | Blank = 4.5V to 5.5V 2.7 = 2.7V to 5.5V 2.5 = 2.5V to 5.5V 1.8 = 1.8V to 5.5V or 1.8V to 3.6V M = 1.7V to 3.6V or 1.7V to 5.5V D = 2.5V to 5.5V L = 1.7V to 5.5V |
| X | Shipping Carrier Option | B or Blank = Bulk (tubes) T = Tape and Reel |
Poznámka: Tabuľka popisu čísla dielu popisuje bežný systém číslovania dielov pre viac čipov, preto môže táto tabuľka obsahovať informácie, ktoré nemusia byť platné pre aktuálne vybraný čip. Tu uvedené informácie sú poskytované na základe maximálneho úsilia a môžu byť nepresné alebo neúplné. Preto vždy skontrolujte najnovší technický list čipu, kde nájdete detailný popis čísla dielu. Ak nájdete nejakú nepresnosť, dajte nám vedieť.
vrátiť späť na zoznam výsledkovPodporovaný programátormi a programovacími adaptérmi/modulmi:
| BeeHive204 | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
| BeeHive204AP | adaptér/modul: AP1 QFN8-4 ZIF (71-2994) |
| BeeHive208S | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
| BeeHive304 | adaptér/modul: AP3 QFN8-4.02 (73-3460) |
| BeeProg2 | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
| BeeProg2AP | adaptér/modul: AP1 QFN8-4 ZIF (71-2994) |
| BeeProg2C | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
| BeeProg3 | adaptér/modul: AP3 QFN8-4.02 (73-3460) |
| BeeHive204AP-AU (prestala byť podporovaná) | adaptér/modul: AP1 QFN8-4 ZIF (71-2994) |
| MEMprog2 (prestala byť podporovaná) | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
| SmartProg2 (prestala byť podporovaná) | adaptér/modul: DIL8/QFN8-4.02 ZIF (70-6098) ALEBO DIL8/QFN8-4.1 ZIF-CS (ord.no. 70-6007) or DIL8/QFN8-4 ZIF (discontinued) |
