Obvod: Am29DL640H [TSOP48]
Výrobca: AMD
Popis čísla dielu pre toto zariadenie:
Nabehnutím kurzora zvýraznite konkrétnu sekciu| Am | AMD Products | |
| XXXX | Family Signature | 29DL = 3V, Simuiltaneous Read/Write |
| XXX | Density, Bus Width and Sector Organization | 16x = 2Mx8 / 1Mx16 32x = 4Mx8 / 2Mx16 400 = 512kx8 / 256kx16 640 = 8Mx8 / 4Mx16 800 = 1Mx8 / 512kx16 |
| X | Process Technology | B = 0.32 um technology C = 0.32 um thin-film technology D = 0.23 um thin-film technology G = 0.17 um thin-film technology H = 0.13 um thin-film technology M = MirrorBit technology |
| XX | Sector Architecture and Sector Write Protection | U, Blank = Uniform sector device B = Bottom boot sector T = Top boot sector H = Uniform sector device, highest address sector protected L = Uniform sector device, lowest address sector protected J40 = (Ultra NAND only) 100\% usable blocks |
| XXX | Speed Option, Voltage regulation | **(*) = 2 or 3 digits indicates speed in ns, device is full voltage range, Vcc=2.7V to 3.6V **(*)R = 2 or 3 digits indicate speed in ns, „R“ indicates regulated voltage range Vcc=3V to 3.6V |
| X | Package Type | P = Plastic DIL J = Plastic LCC S = SOP Z = SSOP E = TSOP E2 = TSOP II F = Reverse TSOP F2 = Reverse TSOP II 0.8mm ball pitch (unless otherwise noted) : MA = 63-ball FBGA (11x12mm) VA = 44-ball FBGA (9.2x8mm, 0.5mm pitch) VR = 48-ball, VFBGA (8.15x6.15mm) WA = 48-ball FBGA (6x8mm) WB = 48-ball, FBGA (6x9mm) WC = 48-ball, FBGA (8x9mm) WD = 63-ball, FBGA (8x14mm) WG = 40-ball, FBGA (8x15mm) WH = 63-ball, FBGA (12x11mm) WK = 47-ball, FBGA (7x10mm, 0.5mm pitch) WL = 48-ball, (11x10mm, 0.5mm pitch) WM = 48-ball, (6x12mm) WN = 84-ball, FBGA(11x12mm) 1.0mm ball pitch (unless othervise noted) : PA = 64-ball, BGA (13x11mm, 1.7mm) PB = 80-ball, BGA (13x11mm) PC = 64-ball, BGA (13x11mm) PE = 80-ball, BGA(10x15mm) |
| X | Temperature Range | C = Commercial I = Industrial E = Extended |
| X | Optional Proccessing | Blank = Standard Proccessing N = ESN devices B = Burn-in |
Poznámka: Tabuľka popisu čísla dielu popisuje bežný systém číslovania dielov pre viac čipov, preto môže táto tabuľka obsahovať informácie, ktoré nemusia byť platné pre aktuálne vybraný čip. Tu uvedené informácie sú poskytované na základe maximálneho úsilia a môžu byť nepresné alebo neúplné. Preto vždy skontrolujte najnovší technický list čipu, kde nájdete detailný popis čísla dielu. Ak nájdete nejakú nepresnosť, dajte nám vedieť.
vrátiť späť na zoznam výsledkovPodporovaný programátormi a programovacími adaptérmi/modulmi:
| BeeHive204 | adaptér/modul: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeHive204AP | adaptér/modul: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
| BeeHive208S | adaptér/modul: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeProg2 | adaptér/modul: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeProg2AP | adaptér/modul: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
| BeeProg2C | adaptér/modul: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeHive204AP-AU (prestala byť podporovaná) | adaptér/modul: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
