Move the cursor over the picture for additional view.

Ask for price

Adapter manual

• Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
• Usage of vacuum pick-up tool is expected for device handling.
• Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
  
  
• Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
• Visually check the placement of adapter in programmer ZIF socket.
• Release the pawl on adapter ZIF socket to open it. The socket cap will open by spring force. Insert the device into adapter ZIF socket. The correct position of the programmed device is shown on PCB of the adapter. The reference corner (e.g. position of pin A1) of the device is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned.
• Visually check the placement of programmed device in adapter ZIF socket. If it looks OK, close adapter ZIF socket cap by hand and secure the pawl.
• To take out the device from adapter, release the pawl on adapter ZIF socket and remove the device.
• When you finish the work with adapter, remove it from programmer ZIF socket.
  
  
• Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.

Software note

• If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)

BGA package

Usable for programmer(s):

Note: This programming adapter / module may not support all devices in the package(s) mentioned above on your programmer. Please, verify situation for particular device(s) you are going to work with using actual Device list of your programmer.