Device: XT27G04ATS [TSOP48]
Manufacturer: XTX
Part number description for this device:
Move the cursor over the box to highlight particular section| XT | Company Prefix | XT = XTX |
| XXX | Product Family | 27G = 2.7V to 3.6V NAND 27Q = 1.65V to 1.95V NAND |
| XX | Product Density | 01 = 1 Gbit 02 = 2 Gbit 04 = 4 Gbit |
| X | Organization | A = 8-bit ECC required B = 0-bit ECC required, ECC is done by internal controller C = 0-bit ECC required, ECC is done by internal controller E = 8-bit ECC required |
| XX | Product Package | TS = TSOP48 BG = BGA24 BS = BGA63 BF = BGA67 |
| X | Product Temperature | I = Industrial (-40°C to 85°C) E = Extended (-25°C to 85°C) C = Commercial (0°C to 70°C) |
| X | Green Code | R = RoHS compliant package G = Green/Reach package |
| X | Product Carrier | A = Tray T = Tape and Reel U = Tube |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive204AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeHive208S | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive304 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeProg2 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg2AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeProg2C | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg3 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
