Device: TS25L80P (ISP)
Manufacturer: Terra Semicond.
Part number description for this device:
Move the cursor over the box to highlight particular section| TS | Terra Semiconductor | |
| XX | Device Type | 25 = SPI interface serial flash memory |
| X | Operating Voltage | S = 1.8V single voltage 1.65V to 1.95V L = 3.0V single voltage 2.7V to 3.6V R = 3.0V single regulated voltage 3.0V to 3.6V |
| XX | Device Density | 10 = 1Mbit 20 = 2Mbit 40 = 4Mbit 80 = 8Mbit 16 = 16Mbit 32 = 32Mbit |
| X | Generation | Blank = 1st generation A = 2nd generation B = 3rd generation |
| X | Pin Compatible | P = W# / HOLD# PD = TSL# / RST# PE = W# / RST# |
| XX | Package Type | S = SOW (200mil) V = SON (150mil) K = Know god die (KGD) |
| X | Temperature Range | C = Commercial (0°C to 70°C) I = Industrial (-40°C to 85°C) |
| X | Environment | Blank = Non Pb-free F = Pb-free |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
