Device: S42WD42 (ISP)
Manufacturer: Summit
Part number description for this device:
Move the cursor over the box to highlight particular section| S | Summit | |
| XXXX | Family Descriptor | MS29 = Voltage supervisory circuit with watchdog timer 42 = Dual voltage supervisory circuit 42WD = Dual voltage supervisory circuit with watchdog timer |
| XX | Density | 02 = 2kbits EEPROM 04 = 4kbits EEPROM 16 = 16kbits EEPROM 42 = 4kbits EEPROM 61 = 16kbits EEPROM |
| X | Package Type | P = PDIP S = SOIC |
| X | Voltage Trip | Blank = 4.5V A = 4.5V B = 4.75V 2.7 = 2.7V |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
