Device: S25FL256SxxBxx20 [BGA24]
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXX | Device Family | S25FL = Spansion Memory 3.0 Volt-Only, Serial Peripheral Interface (SPI) Flash Memory |
| XXX | Density | 128 = 128Mbit 256 = 256Mbit 512 = 512Mbit |
| X | Device Technology | S = 0.065um MirrorBit Process Technology |
| XX | Speed | AG = 133MHz DP = 66MHz DDR |
| X | Package Type | M = 16-pin SO package N = 8-contact WSON 6x8mm package B = 24-ball BGA 6x8mm package, 1.00mm pitch |
| X | Package Materials | F = Lead (Pb)-free H = Low-Halogen, Lead (Pb)-free |
| X | Temperature Range | I = Industrial (–40°C to + 85°C) V = Automotive In-Cabin (–40°C to + 105°C) |
| X | Model Number (Security, Latency Type, Package Details, RESET# and V_IO Support) | 0EHPLC, SO/WSON footprint 2 = EHPLC, 5 x 5 ball BGA footprint 3 = EHPLC, 4 x 6 ball BGA footprint G = EHPLC, SO footprint with RESET# R = EHPLC, SO footprint with RESET# and VIO A = EHPLC, 5 x 5 ball BGA footprint with RESET# and VIO B = EHPLC, 4 x 6 ball BGA footprint with RESET# and VIO C = EHPLC, 5 x 5 ball BGA footprint with RESET# D = EHPLC, 4 x 6 ball BGA footprint with RESET# 9 = HPLC, SO/WSON footprint 4 = HPLC, 5 x 5 ball BGA footprint 8 = HPLC, 4 x 6 ball BGA footprint H = HPLC, SO footprint with RESET# Q = HPLC, SO footprint with RESET# and VIO 7 = HPLC, 5 x 5 ball BGA footprint with RESET# and VIO 6 = HPLC, 4 x 6 ball BGA footprint with RESET# and VIO E = HPLC, 5 x 5 ball BGA footprint with RESET# F = HPLC, 4 x 6 ball BGA footprint with RESET# K = Security, EHPLC, 5 x 5 ball BGA footprint with RESET# and VIO L = Security, EHPLC, 4 x 6 ball BGA footprint with RESET# and VIO S = Security, EHPLC, 5 x 5 ball BGA footprint with RESET# T = Security, EHPLC, 4 x 6 ball BGA footprint with RESET# Y = Security, EHPLC, 5 x 5 ball BGA footprint Z = Security, EHPLC, 4 x 6 ball BGA footprint M = Security, HPLC, 5 x 5 ball BGA footprint with RESET# and VIO N = Security, HPLC, 4 x 6 ball BGA footprint with RESET# and VIO U = Security, HPLC, 5 x 5 ball BGA footprint with RESET# V = Security, HPLC, 4 x 6 ball BGA footprint with RESET# W = Security, HPLC, 5 x 5 ball BGA footprint X = Security, HPLC, 4 x 6 ball BGA footprint |
| X | Model Number (Sector Type) | 0Uniform 64-kB sectors 1 = Uniform 256-kB sectors |
| X | Packing Type | 0Tray 1 = Tube 3 = 13\'\' Trape and Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL8/BGA24-2 ZIF SFlash-1b (70-5027) OR DIL8/BGA24-2 ZIF-CS SFlash-1 (70-3095) |
| BeeHive204AP | adapter/module: AP1 BGA24-2 ZIF SFlash-1b (71-5481) OR AP1 BGA-1114/1197 (discontinued) |
| BeeHive208S | adapter/module: DIL8/BGA24-2 ZIF SFlash-1b (70-5027) OR DIL8/BGA24-2 ZIF-CS SFlash-1 (70-3095) |
| BeeHive304 | adapter/module: AP3 BGA24-2.02 SFlash-1 (73-6196) OR AP3 BGA24-2 SFlash-1 (discontinued) |
| BeeProg2 | adapter/module: DIL8/BGA24-2 ZIF SFlash-1b (70-5027) OR DIL8/BGA24-2 ZIF-CS SFlash-1 (70-3095) |
| BeeProg2AP | adapter/module: AP1 BGA24-2 ZIF SFlash-1b (71-5481) OR AP1 BGA-1114/1197 (discontinued) |
| BeeProg2C | adapter/module: DIL8/BGA24-2 ZIF SFlash-1b (70-5027) OR DIL8/BGA24-2 ZIF-CS SFlash-1 (70-3095) |
| BeeProg3 | adapter/module: AP3 BGA24-2.02 SFlash-1 (73-6196) OR AP3 BGA24-2 SFlash-1 (discontinued) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 BGA24-2 ZIF SFlash-1b (71-5481) OR AP1 BGA-1114/1197 (discontinued) |
