Device: S25FL128PxxNxx01 [WSON8]
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| S | Spansion | |
| XXXX | Family Descriptor | 25FL = CMOS 3.0V-only, SPI Flash memory |
| XXX | Density | 001 = 1Mbit 002 = 2Mbit 004, 040 = 4Mbit 008 = 8Mbit 016 = 16Mbit 032, 032P = 32Mbit 064, 064P = 64Mbit 128, 129 = 128Mbit |
| X | Device Technology | D = 0.25 µm process technology A = 0.20um MirrorBit™ P = 0.09um MirrorBit™ |
| XX | Speed | 0F = 25MHz 0L = 50MHz 0X = 104MHz |
| X | Package Type | M = SOIC8 (200mil), SOIC16(300mil) N = USON8, WSON8 B = 24-ball BGA 6x8 package, 1.00 mm pitch |
| X | Package Materials | A = Standard F = Lead (Pb)-free H = Low-Halogen, Lead (Pb)-free |
| X | Temperature Range | C = Commercial (0°C to 70°C) I = Industrial (-40°C to 85°C) V = Automotive In-cabin (–40°C to +105°C) |
| XX | Additional Ordering Options | 00 = No additional ordering options 00 = Uniform sector (S25FL040A) 01 = Top boot sector (S25FL040A) 02 = Bottom boot sector (S25FL040A) 00 = Uniform 64kB sector product (S25FL128P, S25FL129P) 01 = Uniform 256kB sector product (S25FL128P, S25FL129P) 00 = S0-8 Narrow 150mil package (S25FL002D) 01 = S0-8 Wide 208 mil package (S25FL002D) 02 = 5x5 pin configuration BGA package (S25FL032P,S25FL064P) 03 = 6x4 pin configuration BGA package (S25FL032P,S25FL064P) 01 = 8-pin SO package / 8-contact USON package (S25FL032P) 00 = 16-pin SO package, 8-contact WSON package (S25FL064P) 31 = 6x4 pin configuration BGA package, Uniform 256 KB sectors (S25FL0129P) 30 = 6x4 pin configuration BGA package, Uniform 64 KB sectors (S25FL0129P) 21 = 5x5 pin configuration BGA package, Uniform 256 KB sectors (S25FL0129P) 20 = 5x5 pin configuration BGA package, Uniform 64 KB sectors (S25FL0129P) 01 = SO/WSON package, Uniform 256 KB sectors (S25FL0129P) 00 = SO/WSON package, Uniform 64 KB sectors (S25FL0129P) |
| X | Packing Type | 0Tray 1 = Tube (standard) 3 = 13\'\' Tape & Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL8/QFN8-5.02 ZIF SFlash-1b (70-6073) OR DIL8/QFN8-5/2 ZIF SFlash-1a (ord.no. 70-3968) or DIL8/QFN8-5 ZIF-CS SFlash-1a (ord.no. 70-1275A) or DIL8/QFN8-5/2 ZIF SFlash-1b (discontinued) |
| BeeHive204AP | adapter/module: AP1 QFN8-5.02 ZIF SFlash-1a (71-6691) OR AP1 QFN8-5 ZIF SFlash-1a (ord.no. 71-3088) or AP1 QFN8-5/2 ZIF SFlash-1a (discontinued) |
| BeeHive208S | adapter/module: DIL8/QFN8-5.02 ZIF SFlash-1b (70-6073) OR DIL8/QFN8-5/2 ZIF SFlash-1a (ord.no. 70-3968) or DIL8/QFN8-5 ZIF-CS SFlash-1a (ord.no. 70-1275A) or DIL8/QFN8-5/2 ZIF SFlash-1b (discontinued) |
| BeeProg2 | adapter/module: DIL8/QFN8-5.02 ZIF SFlash-1b (70-6073) OR DIL8/QFN8-5/2 ZIF SFlash-1a (ord.no. 70-3968) or DIL8/QFN8-5 ZIF-CS SFlash-1a (ord.no. 70-1275A) or DIL8/QFN8-5/2 ZIF SFlash-1b (discontinued) |
| BeeProg2AP | adapter/module: AP1 QFN8-5.02 ZIF SFlash-1a (71-6691) OR AP1 QFN8-5 ZIF SFlash-1a (ord.no. 71-3088) or AP1 QFN8-5/2 ZIF SFlash-1a (discontinued) |
| BeeProg2C | adapter/module: DIL8/QFN8-5.02 ZIF SFlash-1b (70-6073) OR DIL8/QFN8-5/2 ZIF SFlash-1a (ord.no. 70-3968) or DIL8/QFN8-5 ZIF-CS SFlash-1a (ord.no. 70-1275A) or DIL8/QFN8-5/2 ZIF SFlash-1b (discontinued) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 QFN8-5.02 ZIF SFlash-1a (71-6691) OR AP1 QFN8-5 ZIF SFlash-1a (ord.no. 71-3088) or AP1 QFN8-5/2 ZIF SFlash-1a (discontinued) |
| MEMprog2 (discontinued) | adapter/module: DIL8/QFN8-5 ZIF-CS (70-0751) |
| SmartProg2 (discontinued) | adapter/module: DIL8/QFN8-5 ZIF-CS (70-0751) |
