Device: S25FL128L (ISP)
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXX | Device Family | S25FL = Spansion Memory 3.0 Volt-Only, Serial Peripheral Interface (SPI) Flash Memory |
| XXX | Density | 64 = 64Mbit 128 = 128Mbit 256 = 256Mbit 512 = 512Mbit |
| X | Device Technology | L = 0.065um Floating Gate Process Technology |
| XX | Speed | AB = 108MHz SDR and 54MHz DDR AG = 133MHz DP = 66MHz DDR |
| X | Package Type | M = 16-pin SOIC / 8-lead SOIC N = 8-contact WSON 6x8mm / WSON 5x6mm / USON 4x4mm B = 24-ball BGA 6x8mm package, 1.00mm pitch |
| X | Package Materials | F = Halogen-free, Lead (Pb)-free H = Low-Halogen, Lead (Pb)-free |
| X | Temperature Range | I = Industrial (–40°C to + 85°C) V = Industrial Plus (-40°C to 105°C) A = Automotive (–40°C to + 85°C) B = Automotive (–40°C to + 105°C) M = Automotive (–40°C to + 125°C) |
| X | Model Number (Additional Ordering Number) | 00 = SOIC16 footprint (300mil) 01 = SOIC8 (208mil) / 8-contact WSON footprint 02 = 5x5 ball BGA footprint 03 = 4x6 ball BGA footprint 04 = USON (4x4mm) |
| X | Packing Type | 0Tray 1 = Tube 3 = 13\'\' Trape and Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive208S | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2C | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
