Device: S25FL064K (ISP)
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXXX | Device Family | S25FL = Spansion Memory 3.0 Volt-only, Serial Peripheral Interface (SPI) Flash Memory |
| XXX | Density | 204, 004 = 4Mbit 008, 208 = 8Mbit 016, 216 = 16Mbit 032 = 32Mbit 064 = 64Mbit 128 = 128Mbit |
| X | Density Technology | K = 0.09um process technology |
| XX | Speed | 0X = 104MHz 0T = 85MHz 0R = 76MHz 0P = 65MHz 0S = 80MHz |
| X | Package Type | M = 8-pin SO package N = 8-contact WSON package B = 24-ball 6x8 mm BGA package, 1.0 mm pitch |
| X | Package Material | F = Lead (Pb)-free H = Low-halogen, Lead (Pb)-free |
| X | Temperature Range | I = Industrial (–40°C to +85°C) V = Automotive (–40°C to +105°C) |
| XX | Model Number (Additional Ordering Options) | 04 = 8-pin SO package (150 mil) 01 = 8-pin SO package (208 mil) 00 = 16-pin SO package (300 mil) 02 = 5x5 ball BGA package 03 = 4x6 ball BGA package Q1 = 8-lead SO package (208 mil) / 8-contact WSON (Default quad mode enabled) |
| X | Packing Type | 0Tray 1 = Tube 3 = 13\'\' Tape and Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
