Device: S25FL040Axxxxx01 (ISP)
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| S | Spansion | |
| XXXX | Device Family | 25FL = SpansionTM Memory 3.0 Volt-only, Serial Peripheral Interface (SPI) Flash Memory |
| XXX | Density | 004, 040 = 4Mbit 008 = 8Mbit 016 = 16Mbit 032 = 32Mbit 064 = 64Mbit |
| X | Device Technology | A = 0.20 µm MirrorBit™ Process Technology |
| XX | Speed | 0L = 50MHz |
| X | Package Type | V = 8-Pin Plastic Small Outline Package (150mil) M = SOIC-16, SOIC-8 (208mil)(for S25FL008A, S25FL040A) N = 8-Contact USON Package, 8-Contact WSON Package |
| X | Package Materials | A = Standard plating F = Lead (Pb)-free |
| X | Temperature Range | I = Industrial (-40°C to 85°C) |
| XX | Model Number (Additional Ordering Options) | 00 = 64 KBytes Uniform sector 01 = Top boot sector 02 = Bottom boot sector |
| X | Packing Type | 0Tray 1 = Tube 3 = 13\'\' Tape & Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
