Device: MBM29F002B [TSOP32]
Manufacturer: Spansion
Part number description for this device:
Move the cursor over the box to highlight particular section| MBM | Fujitsu / Spansion | |
| XX | Family Descriptor | 29 = NOR type FLASH memory |
| XX | Technology | F = 5.0V Flash LV = 3V conventional Flash LP = 3V MirrorFlash DL = 3V Dual operation Flash PL = 3V Page Flash BL = 3V Burst Flash LL = 2.5V conventional Flash DD = 2.5V Dual operation Flash PDD = 2.5V page, dual Flash SL = 1.8V conventional Flash DS = 1.8V dual operation flash PDL = 3.0V page, dual operation flash PDS = 1.8V, dual operation flash BDS = 1.8V burst, dual operation flash BS = Burst Mode Flash Memory |
| XXX | Capacity and Bank Ration for Dual Operation Flash | 001, 010 = 1Mbit (128kx8) 002 = 2Mbit (256kx8) 004, 040 = 4Mbit (512kx8) 008, 080 = 8Mbit (1Mx8) 016, 017 = 16Mbit (2Mx8) 012 = 128Mbit (8Mx16) 032 = 32Mbit( 2Mx16) 033 = 32Mbit (4Mx8) 064, 652 = 64Mbit (4Mx16) 16x = 16Mbit (2Mx8 / 1Mx16) 32x = 32Mbit (4Mx8 / 2Mx16) 64x, 64D = 64Mbit (8Mx8 / 4Mx16) 200 = 2Mbit (256x8 / 128kx16) 400 = 4Mbit (512kx8 / 256kx16) 650, 651 = 64Mbit (4Mx16) 800 = 8Mbit (1Mx8 / 512kx16) 3200 = 32Mbit (2Mx16 / 1Mx32) |
| X | Boot Architecture / Sector Protection | T, ST = Top boot B, SB = Bottom boot U = Uniform sector L = Lower Sector Address |
| X | Device Revision | A = A-revision C = C-version D = D-version E = E-version F = F-version M = M-version |
| XX | Speed Option | 70 = 70 ns 80 = 80 ns 10 = 100 ns 12 = 120 ns 15 = 150 ns 20 = 200 ns |
| XX | Package Type | PCN, PFTN, PTN,TN = TSOP PFTR, PTR, TR = Reverse TSOP PD = PLCC PF = SOP PBT, PBT-SF2 = FBGA PCV = CSOP PFV = SSOP PNS = SON |
| XX | Packing Content | ER = Tape&Reel standard EF = Tape&Reel reverse Y = Extended temperature GT = Burn In |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) OR Top TSOP32 ZIF 18.4mm (70-1250) |
| BeeHive204AP | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
| BeeHive208S | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) OR Top TSOP32 ZIF 18.4mm (70-1250) |
| BeeProg2 | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) OR Top TSOP32 ZIF 18.4mm (70-1250) |
| BeeProg2AP | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
| BeeProg2C | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) OR Top TSOP32 ZIF 18.4mm (70-1250) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
| MEMprog2 (discontinued) | adapter/module: DIL32/TSOP32 ZIF 18.4mm Flash (70-0136) |
| SmartProg2 (discontinued) | adapter/module: DIL32/TSOP32 ZIF 18.4mm Flash (70-0136) |
