Device: EFR32MG1B132F256 [QFN48]
Manufacturer: Silicon Laborat.
Part number description for this device:
Move the cursor over the box to highlight particular section| EFR32 | Wireless Gecko 32-bit | |
| X | Family | F = Flex B = Blue M = Mighty |
| G | Gecko | |
| 1 | Generation | |
| X | Performance Grade | B = Basic P = Performance V = Value |
| XXX | Feature Set Code - r2r1r0 | r2 = Reserved r1 = RF type - 1(TX), 2(RX), 3(Dual-Band) r0 = Frequency band - 1(Sub-GHz), 2(2.4GHz), 3(Dual-Band) |
| F | Memory Type (Flash) | |
| XXX | Flash Size | 32 = 32kB 64 = 64kB 128 = 128kB 256 = 256kB |
| X | Temperature Grade | G = -40°C to 85°C I = -40°C to 125°C |
| X | Package Type | M = QFN J = CSP |
| XX | Pin Count | |
| XX | Revision | R |
| (X) | Optional Label | R = Tape and Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/QFN48-1.02 ZIF EFM-1 (70-3713) |
| BeeHive204AP | adapter/module: AP1 QFN48-1.02 ZIF EFM-1 (71-4828) |
| BeeHive208S | adapter/module: DIL48/QFN48-1.02 ZIF EFM-1 (70-3713) |
| BeeHive304 | adapter/module: AP3 QFN48-1.02 EFM-1 (73-3714) |
| BeeProg2 | adapter/module: DIL48/QFN48-1.02 ZIF EFM-1 (70-3713) |
| BeeProg2AP | adapter/module: AP1 QFN48-1.02 ZIF EFM-1 (71-4828) |
| BeeProg2C | adapter/module: DIL48/QFN48-1.02 ZIF EFM-1 (70-3713) |
| BeeProg3 | adapter/module: AP3 QFN48-1.02 EFM-1 (73-3714) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 QFN48-1.02 ZIF EFM-1 (71-4828) |
