Device: SLE24C164 (ISP)
Manufacturer: Siemens
Part number description for this device:
Move the cursor over the box to highlight particular section| XX | Company | SL, SD = Infineon |
| X | Temperature Range | A = Automotive (-40°C to 85°C) E = Extended (-40°C to 125°C) |
| XX | Family Descriptor | 24, 25, 35 = IIC serial EEPROM 25 = SPI serial EEPROM (if SPI mode is set) |
| X | Technology | Blank = MOS C = CMOS |
| XXX | Density | 01 = 1kbit 02 = 2kbit 04 = 4kbit 06 = 1kbit 08 = 8kbit 16 = 16kbit 26 = 2kbit 32 = 32kbit 46 = 4kbit 64 = 64kbit 86 = 4kbit 164 = 16kbit |
| X | SPI Mode | Blank = not SPI 0SPI mode 0.0 & 1.1 compatible |
| / | ||
| X | Option | Blank P = Page protection |
| X | Package Type | D = DIP8 S = SOIC8 |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
