Device: S-29U294A [SOP8]
Manufacturer: Seiko Instruments
Part number description for this device:
Move the cursor over the box to highlight particular section| S | ||
| X | Family Descriptor | 24 = Serial EEPROM 29 = Serial EEPROM |
| X | Technology | C = CMOS LX = Low power U = Write: 1.5V to 3.6V, Read: 0.9V to 3.6V Z = Read/Write: 0.9V to 3.6V |
| XX | Density | 00 = 512bit 01 = 128x8 02 = 256x8 04 = 512x8 08 = 1kx8 16 = 2kx8 130, 131, 190, 194 = 64 x 16 220, 221, 230, 290, 294 = 128 x 16 330, 331, 390, 394 = 256 x 16 430 = 512x16 530 = 1024x16 630 = 2048x16 |
| X | Package Type | A = A type Blank = B type |
| XX | Package | DP = DIP FJ = SOP FT = TSSOP FE = SOP UP = SOT-89-5 |
| XX | Packing Form | Blank = Magazine TB = Tape (SOP only) |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
| BeeHive204AP | adapter/module: AP1 SOIC8-1 ZIF 170mil (71-1857) |
| BeeHive208S | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
| BeeHive304 | adapter/module: AP3 SOIC8-170 (73-4737) |
| BeeProg2 | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
| BeeProg2AP | adapter/module: AP1 SOIC8-1 ZIF 170mil (71-1857) |
| BeeProg2C | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
| BeeProg3 | adapter/module: AP3 SOIC8-170 (73-4737) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 SOIC8-1 ZIF 170mil (71-1857) |
| MEMprog2 (discontinued) | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
| SmartProg2 (discontinued) | adapter/module: DIL8/SOIC8-1 ZIF 170mil (70-0410) |
