Device: S-24C04B
Manufacturer: Seiko Instruments
Part number description for this device:
Move the cursor over the box to highlight particular section| S | Seiko Instruments Inc. | |
| XX | Family Descriptor | 24 = IIC Serial EEPROM 34 = 2 wire SPD EEPROM |
| XX | Power Supply | C, CV = Read: 1.8V to 5.5V, Write 2.5V to 5.5V CC, CS = Read: 1.8V to 5.5V, Write: 2.7V to 5.5V A = Read: 2.5V to 5.5V, Write 2.5V to 5.5V |
| XXX | Device Density | 01 = 128x8bit 02 = 256x8bit 04 = 512x8bit 08 = 1024x8bit 16 = 2048x8bit 64 = 8192x8bit 128 = 16384x8bit 256 = 32768x8bit 512 = 65536x8bit M01 = 131072x8bit |
| X | Version | A = A-version B = B-version C = C-version D = D-version |
| XX | Temperature Range | Blank OI, I = Industrial Temperature range OA, OH, H = AutomotiveTemperature range |
| XX | Package Type | DP, D8 = DIP8 FJ = SOIC8 FT = TSSOP8 PH = SNT8 H8 = WLP-8C MFN = MSOP J8 = SOP8 (JEDEC) T8 = TSSOP8 K8 = TMSOP8 M5 = SOT23-5 A8 = DFN8(20x30) I8 = SNT-8A H6 = WLP-6A |
| XX | IC direction In Tape Specification | TB = SOIC8, TSSOP8 TF = SNT8 T1 = SOP8 (JEDEC), TSSOP8, SOT23-5, DFN8(20x30), SNT-8A, WLP-6A, WLP-8C T2 = SOP8 (JEDEC) T3 = TMSOP8 |
| X | Enviromental Code | Blank U = Lead-free (Sn 100\\%), halogen-free |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | |
| BeeHive208S | |
| BeeHive304 | adapter/module: AP3 DIL48 (73-3319) |
| BeeProg2 | |
| BeeProg2C | |
| BeeProg3 | adapter/module: AP3 DIL48 (73-3319) |
| MEMprog2 (discontinued) | |
| SmartProg2 (discontinued) |
