Device: uPSD3434EB (ISP)
Manufacturer: STMicroelectronics
Part number description for this device:
Move the cursor over the box to highlight particular section| uPSD | Device Type | uPSD = Microcontroller PSD |
| XX | Family | 33 = Turbo Core 34 = Turbo Plus core 32 = 8032 Core, 16 Macrocells |
| X | SRAM Size | 1 = 2Kbyte 2 = 4Kbytes 3 = 8Kbytes 5 = 32Kbytes |
| X | Main Flash Memory Size | 2 = 64Kbytes 3 = 128Kbytes 4 = 256Kbytes |
| X | IP Mix | A = USB, I2C, PWM, ADC, UARTs, Supervisor C = I2C, PWM, ADC, UARTs, Supervisor D = IP mix: I2C, SPI, UART, IrDA, ADC, Supervisor, PCA E = IP mix: USB, I2C, SPI, UART, IrDA, ADC, Supervisor, PCA |
| X | Operating Voltage | Blank = Vcc=3.0V to 3.6V, Vdd=4.5V to 5.5V V = Vcc=Vdd=3.0V to 3.6V |
| X | Revision | - = Revision A B = Revision B |
| XX | Speed | 24 = 24MHz 40 = 40MHz |
| X | Package Type | T = 52-pin TQFP U = 80-pin TQFP |
| X | Temperature Range | 1 = 0°C to 70°C 6 = -40°C to 85°C |
| X | Shipping Option | T = Tape&Reel packing |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
