Device: ST95040
Manufacturer: STMicroelectronics
Part number description for this device:
Move the cursor over the box to highlight particular section| ST | STMicroelectronics | |
| XX | Family Descriptor | 95 = SPI serial EEPROM 95P = SPI serial EEPROM with data strobe as 95XX0 |
| XX | Density | 01 = 1kbit 02 = 2kbit 04 = 4kbit 08 = 8kbit |
| X | Data Strobe | Blank 0data IN is strobed on rising edge of the clock, and data OUT is synchronized from falling edge of the clock 1 = data IN is strobed on falling edge of the clock, and data OUT is synchronized from rising edge of the clock |
| X | Operating Voltage | Blank = 4.5V to 5.5V W = 2.5V to 5.5V |
| X | Package Type | B = PSDIP M = SOIC |
| X | Temperature Range | 1 = 0°C to 70°C 6 = -40°C to 85°C 3 = -40°C to 125°C |
| XX | Option | TR = Tape&Reel Packing |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | |
| BeeHive208S | |
| BeeHive304 | adapter/module: AP3 DIL48 (73-3319) |
| BeeProg2 | |
| BeeProg2C | |
| BeeProg3 | adapter/module: AP3 DIL48 (73-3319) |
| MEMprog2 (discontinued) | |
| SmartProg2 (discontinued) |
