Device: PSD853F2A [PLCC52]
Manufacturer: STMicroelectronics
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXX | Device Type | PSD8 = 8-bit PSD with Register logic PSD9 = 8-bit PSD with Combinatorial logic |
| X | SRAM Capacity | 1 = 16Kbit 3 = 64Kbit 5 = 256Kbit |
| X | Flash Memory Capacity | 3 = 1Mbit (128Kbx8) 4 = 2Mbit (256Kbx8) 5 = 4Mbit (512Kb x8) |
| X | I/O Count | F = 27 reconfigurable I/O ports G = 52 I/O |
| X | 2nd Flash Memory | 2 = 256Kbit flash memory + SRAM 3 = SRAM but no flash memory 4 = 256Kbit memory but no SRAM 5 = No flash memory + no SRAM |
| X | Operating Voltage | Blank = Vcc=4.5V to 5.5V V = Vcc=3.0V to 3.6V |
| X | Silicon Revision | Blank A = Revision A |
| XX | Speed | 70 = 70ns 90 = 90ns 12 = 120ns 15 = 150ns 20 = 200ns |
| X | Package Type | J = PLCC M = PQFP U = TQFP |
| X | Temperature Range | Blank = Commercial (0°C to 70°C) I = Industrial (-40°C to 85°C) |
| X | Option | T = Tape & Reel packing |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/PLCC52 ZIF PSD-1 (70-0916) |
| BeeHive204AP | - 1 PLCC52 ZIF PSD-1 (discontinued) |
| BeeHive208S | adapter/module: DIL48/PLCC52 ZIF PSD-1 (70-0916) |
| BeeProg2 | adapter/module: DIL48/PLCC52 ZIF PSD-1 (70-0916) |
| BeeProg2AP | - 1 PLCC52 ZIF PSD-1 (discontinued) |
| BeeProg2C | adapter/module: DIL48/PLCC52 ZIF PSD-1 (70-0916) |
| BeeHive204AP-AU (discontinued) | - 1 PLCC52 ZIF PSD-1 (discontinued) |
