Device: SST29EE010
Manufacturer: SST
Part number description for this device:
Move the cursor over the box to highlight particular section| SST | ||
| XX | Family Descriptor | 29 = Page Mode EEPROM |
| X | Power Supply | E = 4.5V to 5..5V L = 3.0V to 3.6V V = 2.7V to 3.6V |
| X | Function | E = Page-Write |
| XXX | Device Density | 010, 010A = 128kx8 020, 020A = 256kx8 040, 040A = 512kx8 200 = 128kx16 400 = 256kx16 512, 512A = 64kx8 800 = 512kx16 |
| XXX | Read Access Speed | 70 = 70 ns 90 = 90 ns 120 = 120 ns 200 = 200 ns |
| X | Minimum Endurance | 4 = 10000 cycles 3 = 1000 cycles 5 = 100000 cycles 6 = 1000000 cycles |
| X | Temperature Range | C = commercial I = industrial A = automotive M = military |
| X | Package Type | N = PLCC W = TSOP P = Plastic DIP U = Unencapsulated die B = TFBGA S = PSOP Q = WSON E = TSOP 8x20, or 10x20 K = TSOP 8x13.4 W = TSOP 8x14, or 10x14 |
| X | Package Modifier | H = 32pin Numeric = Die modifier A = 8 leads or contacts G = 28leads I = 40leads K = 48leads J = 44leads |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | |
| BeeHive208S | |
| BeeHive304 | adapter/module: AP3 DIL48 (73-3319) |
| BeeProg2 | |
| BeeProg2C | |
| BeeProg3 | adapter/module: AP3 DIL48 (73-3319) |
| MEMprog2 (discontinued) | |
| SmartProg2 (discontinued) |
