Device: MN101EFC3Z [TQFP64]
Manufacturer: Panasonic
Part number description for this device:
Move the cursor over the box to highlight particular section| MN | ||
| XXX | Device Type | 101 = 8bit 103 = 32bit |
| X | Device Series | Blank S = High performance MCU H = Fast high performance MCU L = Low power MCU C = C series MCU E = E series MCU |
| X | Internal Memory Type | Blank = Mask ROM F = Flash |
| XX | Device Part. No. | |
| X | Internal Memory Size | 9 = 24kB A = 32kB B = 40kB C = 48kB D = 64kB E = 80kB F = 96kB G = 128kB H = 160kB K = 256kB P = 624kB R = 1024kB |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/TQFP64 ZIF MN101-1 (70-3362) OR DIL48/TQFP64 ZIF-CS MN101-1 (70-3944) |
| BeeHive204AP | adapter/module: AP1 TQFP64 ZIF MN101-1 (71-4124) |
| BeeHive208S | adapter/module: DIL48/TQFP64 ZIF MN101-1 (70-3362) OR DIL48/TQFP64 ZIF-CS MN101-1 (70-3944) |
| BeeHive304 | adapter/module: AP3 QFP64-1.02 MN101-1 (73-4633) |
| BeeProg2 | adapter/module: DIL48/TQFP64 ZIF MN101-1 (70-3362) OR DIL48/TQFP64 ZIF-CS MN101-1 (70-3944) |
| BeeProg2AP | adapter/module: AP1 TQFP64 ZIF MN101-1 (71-4124) |
| BeeProg2C | adapter/module: DIL48/TQFP64 ZIF MN101-1 (70-3362) OR DIL48/TQFP64 ZIF-CS MN101-1 (70-3944) |
| BeeProg3 | adapter/module: AP3 QFP64-1.02 MN101-1 (73-4633) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TQFP64 ZIF MN101-1 (71-4124) |
