Device: PCT25VF080B (ISP)
Manufacturer: PCT
Part number description for this device:
Move the cursor over the box to highlight particular section| PCT | ||
| XX | Family Descriptor | 25 = SPI Serial flash |
| XF | Power Supply | V = 2.7V to 3.6V L = 3.0V to 3.6V W = 1.65V to 1.95V |
| XXX | Device Density | 512 = 512Kbit 010 = 1Mbit 020 = 2Mbit 040 = 4Mbit 080 = 8Mbit 016 = 16Mbit 032 = 32Mbit 064 = 64Mbit |
| X | Version | A = A-version B = B-version C = C-version |
| XX | Operating Frequency | 20 = 20MHz 33 = 33MHz 40 = 40MHz 50 = 50MHz 80 = 80MHz |
| X | Minimum Endurance | 4 = 10000 cycles |
| X | Temperature Range | C = Commercial (0°C to +70°C) I = Industrial (-40°C to +85°C) E = Extended (-20°C to +85°C) |
| XX | Package Type | S = SOIC (150mil) S2, S3 = SOIC (200mil) Q = WSON Q2 = WSON8 (6mm x 8mm) |
| X | Package Modifier | A = 8 leads or contacts C = 16 leads |
| X | Enviromental Attribute | E = non-Pb F = non-Pb / non-Sn |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
