Device: CAV25080 (ISP)
Manufacturer: ON Semiconductor
Part number description for this device:
Move the cursor over the box to highlight particular section| CAT | ON Semiconductor (formerly Catalyst Semiconductor) | |
| XX | Family Descriptor | 25 = SPI serial EEPROM |
| XXX | Density | 010 = 1kbit 020 = 2kbit 040 = 4kbit 080 = 8kbit 160 = 16kbit 320 = 32kbit 640 = 64kbit 128 = 128kbit 256 = 256kbit |
| XXX | Package Type | L = PDIP V = SOIC, JEDEC X = SOIC, EIAJ Y = TSSOP VP2 = TDFN (2x3mm) HU2 = UDFN (2x2mm) ZD2 = TDFN (3x4.9mm) Z = MSOP |
| X | Temperature Range | I = Industrial (-40°C to 85°C) E = Extended (-40°C to 125°C) |
| X | Lead Finish | Blank = Matte-Tin G = NiPdAu |
| XX | Tape & Reel | T = Tape & reel 2 = 2000/reel 3 = 3000/reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
