Device: RD48F2000P0XB [SCSP88] (BEFP)
Manufacturer: Numonyx
Part number description for this device:
Move the cursor over the box to highlight particular sectionXX | Package Designator | JZ = UT-SCSP, BT, Pb-free LZ = UT-SCSP, Tape, leaded NZ = UT-SCSP, BT, leaded PC = Easy BGA, Pb-free PF = SCSP, Pb-free RC = Easy BGA, leaded RD = SCSP, leaded TE = TSOP JS = TSOP, Pb-free |
XXX | Product Line Designator | 48F = Stacked Flash only |
X | Flash #1 Density | 0No Die 1 = 32Mbit 2 = 64Mbit 3 = 128Mbit 4 = 256Mbit 5 = 512Mbit 6 = 1Gbit 7 = 2Gbit 8 = 4Gbit 9 = 8Gbit A = 16Gbit |
X | Flash #2 Density | 0No Die 1 = 32MBit 2 = 64Mbit 3 = 128Mbit 4 = 256Mbit 5 = 512Mbit 6 = 1Gbit 7 = 2Gbit 8 = 4Gbit 9 = 8Gbit A = 16Gbit |
X | Flash #3 Density | 0No Die 1 = 32Mbit 2 = 64Mbit 3 = 128Mbit 4 = 256Mbit 5 = 512Mbit 6 = 1Gbit 7 = 2Gbit 8 = 4Gbit 9 = 8Gbit A = 16Gbit |
X | Flash #4 Density | 0No Die 1 = 32Mbit 2 = 64Mbit 3 = 128Mbit 4 = 256Mbit 5 = 512Mbit 6 = 1Gbit 7 = 2Gbit 8 = 4Gbit 9 = 8Gbit A = 16Gbit |
X | Flash #1 Product Family | 0No die C = Intel Advenced+Boot Block Flash memory, 3.0V core voltage J = Intel StrataFlash memory, 3.0V core voltage L = Intel StrataFlash Wireless memory, 1.8V core voltage LV = Intel StrataFlash Wireless memory system, 1.8V core voltage P = Intel StrataFlash Embedded memory, 1.8V core voltage W = Intel Wireless Flash memory, 1.8V core voltage M = Intel StrataFlash cellular memory |
X | Flash #2 Product Family | 0No Die C = Intel Advanced+Boot Block Flash memory, 3.0V core voltage J = Intel StrataFlash memory, 3.0V core voltage L = Intel StrataFlsh Wireless memory, 1.8V core voltage LV = Intel StrataFlash Wireless memory system, 1.8V core voltage P = Intel StrataFlash Embedded memory, 1.8V core voltage W = Intel Wireless Flash memory, 1.8V core voltage M = Intel StrataFlash cellular memory |
X | I/O Voltage, CE# Configuration | Z = 3.0V I/0, Individual chip enables Y = 1.8V I/0, Individual chip enables V = 3.0V I/O, Virtual CE# U = 1.8V I/O, Virtual CE# R = 3.0V I/O, mixed Individual/Virtual CE# T = 2.3V to 3.6V I/O & core, Virtual CE# Q = 1.8V I/O, mixed Individual/Virtual CE# X = 2.3V to 3.6V I/O & core, Individual CE# |
X | Parameter, Mux Configuration | B = Bottom parameter, non-mux T = Top parameter, non-mux D = Dual parameter, non-mux C = Bottom parameter, ADMux I/O U = Top parameter, ADMux I/O 0Non-parameter, non-mux 1 = Non-parameter, ADMux I/O 3 = Non-parameter, full ADMux I/O |
X | Ballout Identifier | 0Discrete B = x16D (DRAM), 105-ball C = x16C (PSRAM), 107-ball L = \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'I\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ballout P = x32 Q = QUAD/+ ballout, 88-ball S = Sync ballout, original 96-ball version V = x16 Split Bus, 165-ball D = x16 LPCP ballout, 56-ball (low pin count PSRAM) E = x16SBD, 133-ball |
X | Device Version | 0Initial version E = E-version F = F-version G = G-version H = H-version I = I-version J = J-version K = K-version |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
BeeHive204 | adapter/module: BGA-0385/0336 (70-0385/0336) = BGA-Bottom-15 (70-0385) + BGA-Top-29 ZIF (70-0336) |
BeeHive204AP | adapter/module: AP1 BGA-0385/0336 (71-2125) |
BeeHive208S | adapter/module: BGA-0385/0336 (70-0385/0336) = BGA-Bottom-15 (70-0385) + BGA-Top-29 ZIF (70-0336) |
BeeProg2 | adapter/module: BGA-0385/0336 (70-0385/0336) = BGA-Bottom-15 (70-0385) + BGA-Top-29 ZIF (70-0336) |
BeeProg2AP | adapter/module: AP1 BGA-0385/0336 (71-2125) |
BeeProg2C | adapter/module: BGA-0385/0336 (70-0385/0336) = BGA-Bottom-15 (70-0385) + BGA-Top-29 ZIF (70-0336) |
BeeHive204AP-AU (discontinued) | adapter/module: AP1 BGA-0385/0336 (71-2125) |