Device: M58BW016FT [PQFP80]
Manufacturer: Numonyx
Part number description for this device:
Move the cursor over the box to highlight particular section| M58 | Device type | |
| B | Architecture | B = Burst Mode |
| W | Operating Voltage | W = VDD = 2.7V to 3.6V; VDDQ = VDDQIN =2.4 to VDD VDD = 2.7V to 3.6V, for 45 ns speed class VDD = 2.7V to 3.3V, for 55 ns speed class VDDQ = 2.4V to VDD, for 45ns and 55ns speed classes |
| XXXX | Device Function | 016D = 16 Mbit (x32), boot block, burst, 0.15um 016F = 16 Mbit (x32), boot block, burst, 0.11um 32F = 32 Mbit (x32), boot block, burst, 0.11um |
| X | Array Matrix | T = Top Boot B = Boottom Boot |
| XXX | Speed | 4 = 45 ns 5 = 55 ns 7 = 70 ns 8 = 80 ns |
| XX | Package | T = PQFP80 ZA = LBGA 10x12mm |
| X | Temperature Range | 3 = Automotive (-40°C to 125°C) |
| X | Version | F = Silicon Version F |
| X | Option | Blank = Standard packing T = Tape & Reel Packing F = ECOPACK package, tape and reel packing |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/PQFP80 ZIF M58BW-1 (70-0225) |
| BeeHive204AP | adapter/module: AP1 PQFP80 ZIF M58BW-1 (71-1548) |
| BeeHive208S | adapter/module: DIL48/PQFP80 ZIF M58BW-1 (70-0225) |
| BeeProg2 | adapter/module: DIL48/PQFP80 ZIF M58BW-1 (70-0225) |
| BeeProg2AP | adapter/module: AP1 PQFP80 ZIF M58BW-1 (71-1548) |
| BeeProg2C | adapter/module: DIL48/PQFP80 ZIF M58BW-1 (70-0225) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 PQFP80 ZIF M58BW-1 (71-1548) |
