Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: M29DW128G [TSOP56]

Manufacturer: Numonyx

Part number description for this device:

Move the cursor over the box to highlight particular section
M    
XX Family Descriptor 28 = FLASH
29 = Single Supply Flash memory
29K = LightFlash
50 = Flash memory for PC BIOS
29D = Dual Bank Flash
X Operating Voltage F = 5V
W = 2.7V to 3.6V
V = Low-voltage
FLW = Firmware Hub/Low pin count interface, Vcc=2.7V to 3.6V
LPW = Low pin count interface, Vcc=2.7V to 3.6V
XXX Density 016E = 1Mx16, Uniform block
032E = 2Mx16, Uniform block
064E = 4Mx16, Uniform block
641F = 4Mx16
127G = 16Mx8 / 8Mx16, page, dual boot
128F = 16Mx8 / 8Mx16
128G = 8Mx16, page, dual boot
X Boot Block Architecture T = Top Boot Block
B = Bottom Boot Block
XX Speed Option 70 = 70 ns
80 = 80 ns
90 = 90 ns
100 = 100 ns
120 = 120 ns
X Power Supplies Blank = Vcc +/-10\\\\%, Vpp +/-5\\\\%
X = Vcc +/-5\\%, Vpp +/-5\\%
Y = Vcc +/-10\%, Vpp +/-10\%
X Package Type N = TSOP40, TSOP48
NF = TSOP56: 14 x 20mm
P = Plastic DIP
K = PLCC
M = PSOP
B = Plastic DIP32
C = PLCC32
NZ = TSOP32
ZA = TBGA64: 10 x 13mm, 1mm pitch (for M29DW256G)
ZA = TFBGA48 : 6 x 9mm, 0.80mm pitch
ZB = TFBGA
ZS = FBGA64: 11 x 13mm, 1mm pitch
X Temperature Range 0, 1 = 0°C to 70°C
3 = -40°C to 125°C
5 = -20°C to 85°C
6 = -40°C to 85°C
XX Option T, S = Tape&Reel
R = Reverse pinout

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive204AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeHive208S adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive304 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeProg2 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg2AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeProg2C adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg3 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeHive204AP-AU (discontinued) adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
go back to result page
🍪
Back to TOP