Device: MC68HC11A8 (ISP)
Manufacturer: Motorola
Part number description for this device:
Move the cursor over the box to highlight particular section| MC | Status of Product | MC = Fully qualified XC = Partial qual PC = Product engineering |
| 68 | Numeric Designator (Optional) | |
| XX | Operating Voltage Range | HC = HCMOS (Vdd=5.0V +/-10\\%) L = HCMOS (Vdd=3.0V to 5.5V) |
| X | COP Option (Only On A-series Devices) | Blank = COP Disabled P = COP Enabled |
| X | Memory Type | Blank = Masked ROM or No ROM 7 = EPROM/OTP ROM 8 = EEPROM 9 = FLASH |
| 11XXX | Base Part Number | |
| X | Monitor Mask | None = Blank B = Buffalo |
| X | Temperature Range | Blank = 0°C to 70°C C = -40°C to 85°C V = -40°C to 105°C M = -40°C to 125°C |
| XX | Package Type | FN = PLCC FS = CLCC FU = QFP64/80 FB = QFP44 PV = TQFP112 PU = TQFP80/100 PB = TQFP52 P = DIP40/48 S = SDIP48 |
| X | Maximum Clock Speed | 2 = 2.0 MHz 3 = 3.0 MHz 4 = 4.0 MHz |
| XX | Tape & Reel Option | Blank = Standard Packaging R2 = Tape & Reel Packaging |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
