Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: MT29F2G08ABAEAH4 [VFBGA63] (SAG-01)

Manufacturer: Micron

Part number description for this device:

Move the cursor over the box to highlight particular section
MT Micron Technology  
XXX Product Family 29F = Single-supply NAND flash
29E = Enterprise NAND flash
29H = High-speed NAND flash
XX Density 1G = 1Gbit
2G = 2Gbit
4G = 4Gbit
8G = 8Gbit
16G = 16Gbit
32G = 32Gbit
64G = 64Gbit
128G = 128Gbit
256G = 256Gbit
512G = 512Gbit
1T = 1Tbit
2T = 2Tbit
4T = 4Tbit
XX Device Width 01 = 1bit
08 = 8 bits
16 = 16bits
X Level A = SLC
B = Reserved
C = MLC-2
E = TLC
X Classification A = 1 die, 0 nCE, 0 RnB, 1 I/O channel
B = 1 die, 1 nCE, 0 RnB, 1 I/O channel
D = 2 dies, 1 nCE, 1RnB, 1 I/O channel
E = 2 dies, 2 nCE, 2 RnB, 2 I/O channels
F = 2 dies, 2 nCE, 2 RnB, 1 I/O channel
G = 3 dies, 3 nCE, 3 RnB, 3 I/O channels
J = 4 dies, 2 nCE, 2 RnB, 1 I/O channel
K = 4 dies, 2 nCE, 2 RnB, 2 I/O channels
L = 4 dies, 4 nCE, 4 RnB, 4 I/O channel
M = 4 dies, 4 nCE, 4 RnB, 2 I/O channels
Q = 8 dies, 4 nCE, 4 RnB, 4 I/O channel
R = 8 dies, 2 nCE, 2 RnB, 2 I/O channels
T = 16 dies, 8 nCE, 4 RnB, 2 I/O channel
U = 8 dies, 4 nCE, 4 RnB, 2 I/O channels
V = 16 dies, 8 nCE, 4RnB, 4 I/O channels
X Operating Voltage Range A = Vcc: 3.3V (2.70V to 3.60V), Vccq: 3.3V (2.70V to 3.60V)
B = Vcc: 1.8V (1.70V to 1.95V), Vccq: 1.8V (1.70V to 1.95V)
C = Vcc: 3.3V (2.70V to 3.60V), Vccq: 1.8V (1.70V to 1.95V)
E = Vcc: 3.3V (2.70V to 3.60V), Vccq: 3.3V (2.70V to 3.60V) or
1.8V (1.70V to 1.95V)
F = Vcc: 3.3V (2.50V to 3.60V), Vccq: 1.2V (1.14V to 1.26V)
G = Vcc: 3.3V (2.60V to 3.60V), Vccq: 1.8V (1.70V to 1.95V)
H = Vcc: 3.3V (2.50V to 3.60V), Vccq: 1.2V (1.14V to 1.26V) or
1.8V (1.70V to 1.95V)
J = Vcc: 3.3V (2.50V to 3.60V), Vccq: 1.8V (1.70V to 1.95V)
K = Vcc: 3.3V (2.60V to 3.60V), Vccq: 3.3V (2.60V to 3.60V)
L = Vcc: 3.3V (2.60V to 3.60V), Vccq: 3.3V (2.60V to 3.60V) or
1.8V (1.70V to 1.95V)
X Generation Feature Set A = 1-st set of device features
B = 2-nd set of device features (only if different than 1-st set)
C = 3-rd set of device features (only if different)
D = 4-th set of device features (only if different)
etc.
X Interface A = Asynchronous only
B = Synchronous/Asynchronous
C = Synchronous only
D = SPI
XX Package Code SF = 16-pin SOP, 300mils
WP = 48-pin TSOP I (CPL version, Pb-free)
WC = 48-pin TSOP I (OCPL version, Pb-free)
WB = 8-pin U-PDFN, 6x8x0.65
C3 = 52-pad ULGA, 12x17x0.65
C4 = 52-pad VLGA, 12x17x1.0(SDP/DDP/QDP)
C5 = 52-pad VLGA, 14x18x1.0(SDP/DDP/QDP)
C6 = 52-pad LLGA, 14x18x1.47(DDP/QDP/8DP)
C7 = 48-pad LLGA, 12x20x1.47(8DP)
C8 = 52-pad WLGA, 14x18x0.75(DDP/QDP)
G1 = 272-ball VBGA, 14x18x1.0 (SDP, DDP, 3DP, QDP)
G2 = 272-ball VBGA, 14x18x1.3 (QDP, 8DP)
G6 = 272-ball VBGA, 14x18x1.5 (16DP)
H1 = 100-ball VBGA (Pb-free), 12x18x1.0
H2 = 100-ball TBGA (Pb-free), 12x18x1.2
H3 = 100-ball LBGA (Pb-free), 12x18x1.4 (DDP/QDP/8DP)
H4 = 63-ball VFBGA, 9x11x1
HC = 63-ball VFBGA, 10.5x13x1.0
H6 = 152-ball VBGA, 14x18x1.0 (SDP, DDP)
H7 = 152-ball TBGA, 14x18x1.2 (QDP)
H8 = 152-ball LBGA, 14x18x1.4 (8DP)
H9 = 100-ball LBGA, 12x18x1.6 (16DP)
J1 = 132-ball VBGA, 12x18x1.0 (SDP, DDP)
J2 = 132-ball TBGA, 12x18x1.2 (QDP)
J3 = 132-ball LBGA, 12x18x1.4 (8DP)
J4 = 132-ball VBGA, 12x18x1.0 (SDP, DDP)
J5 = 132-ball TBGA, 12x18x1.2 (QDP)
J6 = 132-ball LBGA, 12x18x1.4 (8DP)
J7 = 152-ball LBGA, 14x18x1.5 (16DP)
J9 = 132-ball LBGA, 12x18x1.5 (16DP)
12 = 24-ball T-PBGA, 6x8x1.5
XX Speed Grade (Synchronous) Blank = Asynchronous only
20 = 100MT/s
15 = 133MT/s
12 = 166MT/s
10 = 200MT/s
6 = 333MT/s
5 = 400MT/s
4 = 533MT/s
3 = 667MT/s
XX Temperature Range Blank = Commercial (0°C to 70°C)
AAT = Automotive Industrial (-40°C to 105°C)
AIT = Automotive Industrial (-40°C to 85°C)
IT = Extended (-40°C to 85°C)
WT = Wirelles (-25°C to 85°C)
X Special Options E = Error correction with internal ECC enabled
M = Media
R = MLC+Features
X = Premium lifecycle product (PLP)
S = Security features
Z = Polyimide (if applicable)
XX Production Status Blank = Production
ES = Engineering samples
QS = Qualification samples
MS = Mechanical samples
:    
X Design Revision (Shrink) A = 1-st design revision
B = 2-nd design revision
etc.

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: DIL48/BGA63-1 ZIF NAND-1 (70-3105) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeHive204AP adapter/module: AP1 BGA63-1 ZIF NAND-1 (71-3669) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeHive208S adapter/module: DIL48/BGA63-1 ZIF NAND-1 (70-3105) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeProg2 adapter/module: DIL48/BGA63-1 ZIF NAND-1 (70-3105) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeProg2AP adapter/module: AP1 BGA63-1 ZIF NAND-1 (71-3669) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeProg2C adapter/module: DIL48/BGA63-1 ZIF NAND-1 (70-3105) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeHive204AP-AU (discontinued) adapter/module: AP1 BGA63-1 ZIF NAND-1 (71-3669) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
go back to result page
🍪
Back to TOP