Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: M29W128FHxxN [TSOP56]

Manufacturer: Micron

Part number description for this device:

Move the cursor over the box to highlight particular section
M    
XX Family Descriptor 28 = FLASH
29 = Single Supply Flash memory
29K = LightFlash
50 = Flash memory for PC BIOS
29D = Dual or Multiple Bank Flash
X Operating Voltage F = 5V
W = 2.7V to 3.6V
V = Low-voltage
FLW = Firmware Hub/Low pin count interface, Vcc=2.7V to 3.6V
LPW = Low pin count interface, Vcc=2.7V to 3.6V
XXX Density 004, 004B = 512kx8
008, 008A = 1Mx8
010B = 128kx8, Uniform block
017D = 2Mx8, Uniform block
022B = 256kx8
040, 040B = 512kx8, Uniform block
102B = 64kx16
160B, 160D, 160E = 2Mx8 / 1Mx16
200B = 256kx8 / 128kx16
320D, 320E = 4Mx8 / 2Mx16
400, 400B, 400D, 400F = 512kx8 / 256kx16
512B = 64kx8
640D, 640F, 640G, 064F = 8Mx8 / 4Mx16
641D = 4Mx16, Uniform block
800, 800A, 800D = 1Mx8 / 512kx16
128F, 128G = 16Mx8 / 8Mx16, Uniform block
256G = 32Mx8 / 16Mx16, Uniform block
640GS = 64Mbit (x8/x16), boot block, uniform or boot block, secure flash memory
X Boot Block Architecture T = Top Boot Block
B = Bottom Boot Block
H = Protection on highest address block
L = Protection on lowest address block
XX Speed Option 55, 5A = 55 ns
60 = 60 ns
70, 7A = 70 ns
80 = 80 ns
90 = 90 ns
100 = 100 ns
120 = 120 ns
X Power Supplies Blank = Vcc +/-10\\\\%, Vpp +/-5\\\\%
X = Vcc +/-5\\%, Vpp +/-5\\%
Y = Vcc +/-10\%, Vpp +/-10\%
X Package Type P = Plastic DIP
N, NA = TSOP40, TSOP48
NB = TSOP56
K = PLCC
ZA, ZB, ZF = TBGA, TFBGA, LFBGA
ZS = LBGA, FBGA
M = PSOP
B = Plastic DIP32
C = PLCC32
NZ = TSOP32
X Temperature Range 0, 1 = 0°C to 70°C
3 = -40°C to 125°C
5 = -20°C to 85°C
6 = -40°C to 85°C
XX Option T, S = Tape & Reel
R = Reverse pinout
Blank = Standard packing
E = Lead-free package, Standard packing
F = Lead-free package, Tape & Reel packing

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive204AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeHive208S adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive304 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeProg2 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg2AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeProg2C adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg3 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeHive204AP-AU (discontinued) adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
go back to result page
🍪
Back to TOP