Device: SST39LF400A [TSOP48]
Manufacturer: Microchip (SST)
Part number description for this device:
Move the cursor over the box to highlight particular section| SST | ||
| XX | Family Descriptor | 39 = Multi-Purpose Flash |
| xF | Power Supply | S = 4.5V to 5..5V L = 3.0V to 3.6V V = 2.7V to 3.6V U = 2.2V to 2.8V |
| XXX | Device Density | 010, 010A = 128kx8 016 = 2Mx8 020, 020A = 256kx8 040 = 512kx8 080 = 1Mx8 100 = 64kx16 160 = 1Mx16 200A = 128kx16 320 = 2Mx16 400, 400A = 256kx16 512, 512A = 64kx8 800, 800A = 512kx16 |
| X | Version | Blank A = Special feature version |
| X | Feature | P = Block-Protection Q = Vddq pin for I/O power supply |
| XXX | Read Access Speed | 55 = 55ns 45 = 45ns 70 = 70ns 90 = 90ns 120 = 120ns 200 = 200ns |
| X | Minimum Endurance | 3 = 1000 cycles 4 = 10000 cycles 5 = 100000 cycles 6 = 1000000 cycles |
| X | Temperature Range | C = Commercial I = Industrial A = Automotive M = Military |
| X | Package Type | N = PLCC W = TSOP P = Plastic DIP U = Unencapsulated die B = TFBGA S = PSOP Q = WSON E = TSOP 8x20, or 10x20 K = TSOP 8x13.4 M = WFBGA W = TSOP 8x14, or 10x14 C = XFLGA |
| X | Package Modifier | H = 32pin Numeric = Die modifier A = 8 leads or contacts G = 28leads I = 40leads K = 48leads or balls J = 44leads Q = 48 balls or bumps |
| X | Environmental Attribute | E = non-Pb |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeHive204AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
| BeeHive208S | adapter/module: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeProg2 | adapter/module: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeProg2AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
| BeeProg2C | adapter/module: Bottom TSOP48 NOR-1 (70-1227) + Top TSOP48 ZIF 18.4mm (70-1228) Top TSOP48 ZIF 18.4mm (70-1228) + Top TSOP48 ZIF 18.4mm (70-1228) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988) |
