Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: MX25S8035Fxxx02 [WSON8 6x5] (Quad I/O)

Manufacturer: Macronix

Part number description for this device:

Move the cursor over the box to highlight particular section
XX Manufacturer MX = Macronix
KH = KHIC
XX Family Descriptor 25, 66 = Serial FLASH
X Type V = 2.5V
L = 3.0V
U = 1.8V
XXXXXX Capacity & Mode 512, 512C, 512E, 5121E = 512kbit
1001E, 1005, 1005A, 1005C, 1006E, 1021E, 1025C = 1Mbit
2005, 2005C, 2006E, 2025, 2025C, 2026C, 2026D, 2026E = 2Mbit
4005, 4005A, 4005C, 4006E, 4025A, 4025C, 4026E, 4033E, 4035 = 4Mbit
8005, 8005A, 8006E, 8008E, 8025, 8032E, 8035, 8035E, 8036E = 8Mbit
1602, 1605, 1605A, 1605D, 1606E, 1608D, 1608E, 1633E, 1635E, 1635D, 1636D, 1691E = 16Mbit
1655D = 16Mbit security type
3205, 3205A, 3205D, 3206E, 3208D, 3208E, 3225D, 3235D, 3235E,3235F,3236D = 32Mbit
3237D, 3239E, 3273E, 3275E, 3291E = 32Mbit
3255D, 3255E = 32Mbit security type
6405,6405D,6406E,6408D,6408E,6435E,6435F,6436E,6439E,6445E,6446E,6455E,6465E,6473E,6475E,6491E = 64Mbit
6455E = 64Mbit security type
12805N, 12805D, 12832F, 12833F, 12835E, 12835F, 12836E, 12839F, 12843G, 12845E, 12845G, 12846E = 128Mbit
12850F, 12865E, 12865F, 12872F, 12890F, 12891F, 12892F, 128356 = 128Mbit
12855E, 12855F = 128Mbit, with advanced security feature
12873F, 12873G = 128Mbit, default Quad I/O enable, and cannot be changed
128736 = 128Mbit, with Permanent QE = 1
12855E = 128Mbit with advanced security feature
12875F = 128Mb, default Quad I/O enable
25633F, 25635E, 25635F, 25636E, 25641G, 25643G, 25639F, 25645G, 25672F, 25733F, 25735F, 25745G = 256Mbit
25835E = 256Mbit
25655E, 25855E, 25655F = 256Mbit Quad I/O with advanced security feature
25735E = 256Mbit Quad I/O with 4-bytes address
25671G, 25672G, 25673G, 25691G = 256Mbit, default Quad I/O enable, and cannot be changed
25773G = 256Mbit, default Quad I/O enabled, and cannot be changed, 4-Byte Address Mode permanent interface
51235F, 51241G, 51243G, 51243J, 51245G, 51245J, 51255G, 51265G, 51279G = 512Mbit
51237G = 512Mbit, with 1.8V VIO
51250F = 512Mbit, with RPMC
51255F = 512Mbit, Secured type
51273G, 51291G, 51293G = 512Mbit, default Quad I/O enable, and cannot be changed
1G45G = 1Gbit
XX Package Type P = PDIP8 300mil
M = SOP16 300mil, SOP8 150mil (only for: MX25L5121E, MX25L1021E, MX25L1006E)
BA = WLCSP
BB = WLCSP (4.02x2.08mm - 6x4 ball array, 0.5mm pitch)
BF = 48-Ball WLCSP
M1 = SOP8 150mil
M2 = SOP8 200mil
MB = 200mil 8-VSOP
ZB = 8-USON (4x3mm)
ZC = 8-XSON (4x4mm)
ZM = SON8 (6x5mm, 1mm package height)
ZN = WSON8 (6x5mm or 8x6mm, 0.8mm package height)
Z2 = WSON8 (8x6x0.8mm, lead pitch 1.27mm)
Z4 = WSON8 (8x6x0.8mm, lead pitch 1.27mm) (3.4x4.3mm EP)
ZU = USON8 (2x3mm or 4x4mm, 0.6mm package height)
XC = 24 ball TFBGA (6x8mm, 4x6 Ball Array)
XD = 24 ball TFBGA (6x8mm, 5x5 Ball Array)
0TSSOP8 170mil
GA = 8-WLGA (6x5mm)
X Temperature Range C = Commercial
I = Industrial
R = Automotive (-40°C to 105°C)
XX Speed Option 08 = 8ns
10 = 10ns
12 = 12 ns
14 = 70MHz
15 = 15 ns
20 = 20 ns
25 = 25ns
X Option Blank = Normal
G = Pb-free

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive304 adapter/module: AP3 QFN8-1.01 SFlash-1 (73-3162) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
BeeProg3 adapter/module: AP3 QFN8-1.01 SFlash-1 (73-3162) Support of this chip is restricted to some programmer[s] only. Contact manufacturer of programmer for details.
go back to result page
🍪
Back to TOP