Device: LFXP10E (ISP)
Manufacturer: Lattice
Part number description for this device:
Move the cursor over the box to highlight particular section| LFXP | Device Family | LFXP = LatticeXP FPGA |
| XX | Logic Capacity | 3 = 3K LUTs 6 = 6K LUTs 10 = 10K LUTs 15 = 15K LUTs 20 = 20K LUTs |
| X | Supply Voltage | C = 1.8V/2.5V/3.3V E = 1.2V |
| X | Speed | 3 = Slowest 4 5 = Fastest |
| XXXXXX | Package Type | T100 = 100-pin TQFP T144 = 144-pin TQFP Q208 = 208-pin QFP F256 = 256-ball fpBGA F388 = 388-ball fpBGA F484 = 484-ball fpBGA TN100 = 100-pin Lead-free TQFP TN144 = 144-pin Lead-free TQFP QN208 = 208-pin Lead-free PQFP FN256 = 256-ball Lead-free fpBGA FN388 = 388-ball Lead-free fpBGA FN484 = 484-ball Lead-free fpBGA |
| X | Grade | C = Commercial I = Industrial |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
