Device: KH25L1605A (ISP)
Manufacturer: KHIC
Part number description for this device:
Move the cursor over the box to highlight particular section| KH | KHIC | |
| XX | Family Descriptor | 25 = Serial FLASH |
| X | Type | U = 1.8V L = 3.0V |
| XXXXX | Density & Mode | 512, 5121E = 512Kbit 1005, 1006E, 1021E, 1026E = 1Mbit 2005, 2006E = 2Mbit 4005A, 4006E, 4033E = 4Mbit 8005, 8036D, 8006E, 8008E, 8073E = 8Mbit 1605A, 1605D, 1606E, 1608E, 1633E, 1635D, 1635F, 1673E = 16Mbit 3205D, 3206E, 3208E, 3239E, 3255E = 32Mbit 6405D, 6406E, 6408E, 6439E, 6439F, 6455E, 6456E, 6473E = 64Mbit 12835F, 12839F, 12845E, 12855F, 12873F = 128Mbit 25639F = 256Mbit |
| X | Package Type | P = PDIP8 300mil M1 = SOP8 150mil M2 = SOP8 200mil M = SOP16 300 mil MB = VSOP8 200 mil ZN = WSON8 (6x5mm, 0.8mm height) ZU = USON8 (2x3mm, 0.6mm height) 0TSSOP8 173mil XC = 24 ball TFBGA (6x8mm, 4x6 Ball Array) XD = 24 ball TFBGA (6x8mm, 5x5 Ball Array) |
| X | Temperature Range | C = Commercial I = Industrial |
| XX | Speed Option | 10 = 104MHz 12 = 86MHz 15 = 66MHz, for SPI 20 = 45MHz |
| X | Option | Blank = Normal G = Pb-free |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
