Device: X24C00 (ISP)
Manufacturer: IC Microsystems
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXX | Family Descriptor | X24C = IIC serial EEPROM |
| X | Technology | Blank = CMOS C = CMOS |
| XXX | Density | 00, 001 = 128bit 01, 012 = 1kbit 02, 022 = 2kbit 04 = 4kbit 08 = 8kbit 16 = 16kbit 32 = 32kbit 64 = 64kbit 128 = 128kbit 256 = 256kbit |
| X | Package Type | P = 8-lead plastic DIP S8 = 8-lead SOIC S14 = 14-lead SOIC |
| X | Temperature Range | Blank = Commercial (0°C to 70°C) I = Industrial (-40°C to 85°C) M = Military (-55°C to 125°C) |
| X | Environmental Flow | Blank = Standard package, non-lead free G = RoHS compliant lead free package |
| X | Vcc Limits | Blank = 4.5V to 5.5V 3.5 = 3.5V to 5.5V 3 = 3.0V to 5.5V 2.7 = 2.7V to 5.5V |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
