Device: GW1N-UV4 [PG256](ver B)
Manufacturer: Gowin Semicond.
Part number description for this device:
Move the cursor over the box to highlight particular section| XXXXXX | Product Series | GW1N = GW1N series GW1NR = GW1NR series GW1NS = GW1NS series GW1NSR = GW1NSR series GW1NSE = GW1NSE series GW1NZ = GW1NZ series GW1NRF = GW1NRF series GW1N-A = GW1N-A series |
| XX | Core Supply Voltage | ZV = 0.9V (GW1NZ only) LV = 1.2V UV = 1.8V / 2.5V / 3.3V LX = Vccx: 1.8V UX = Vccx: 2.5V / 3.3V |
| XXXX | Logic Density | 1/1S = 1152 LUTs 1P5 = 1584 LUTs 2/2B = 2304 LUTs or 1728 LUTs 4/4B = 4608 LUTs 6 = 6912 LUTs 9 = 8640 LUTs |
| X | ARM Processor | Blank = No processor C = ARM Cortex-M3 |
| XX | Package Type | LQ = LQFP MG = MBGA UG = UBGA PG = PBGA QN, FN = QFN CS, CM = WLCSP |
| XXX | Pin Number | |
| X | Pin Compatibility Option | Blank = Standard pinout X = Latice MachX02/3 pinout M = Intel/Altera MAX II/10 pinout |
| X | Embedded PSRAM | Blank = No PSRAM P = - embedded PSRAM (GW1NSR/1NSR only) |
| X | Grade | C = Commercial (0°C to 85°C) I = Industrial (-40°C to 100°C) ES = Engineering Sample |
| X | Speed | 4 = Slowest 5 6 = Fastest |
| XXXX | Date Code | |
| X | Version | Blank = Initial A = A-version B = B-version C = C-version D = D-version |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: BGA-6434/1079A (70-6434/1079A) = BGA-Bottom-527 (70-6434) + BGA-Top-208 ZIF (a) (70-1079A) |
| BeeHive208S | adapter/module: BGA-6434/1079A (70-6434/1079A) = BGA-Bottom-527 (70-6434) + BGA-Top-208 ZIF (a) (70-1079A) |
| BeeHive304 | adapter/module: AP3 BGA256-3 PLD-29 (73-6476) |
| BeeProg2 | adapter/module: BGA-6434/1079A (70-6434/1079A) = BGA-Bottom-527 (70-6434) + BGA-Top-208 ZIF (a) (70-1079A) |
| BeeProg2C | adapter/module: BGA-6434/1079A (70-6434/1079A) = BGA-Bottom-527 (70-6434) + BGA-Top-208 ZIF (a) (70-1079A) |
| BeeProg3 | adapter/module: AP3 BGA256-3 PLD-29 (73-6476) |
