Device: GSS01GPAM0-T1NM [TSOP48]
Manufacturer: GSTO
Part number description for this device:
Move the cursor over the box to highlight particular section| XX | Devcie Family | GS = GSTO NAND FLash Memory for Embedded |
| X | NAND Type | S = SLC M = MLC |
| XXX | Density | 01G = 1Gbit 02G = 2Gbit 04G = 4Gbit |
| X | Interface | P = PPI S = SPI |
| X | Voltage | A = 3.3V B = 1.8V |
| XX | Flash Technology | |
| XX | Package Type | W8 = WSON8 (8x6mm) T1 = TSOP48 (20x12mm) B1 = FBGA63 (11x9mm) |
| X | ECC Strength | NM = 64 Byte OOB (4-bit ECC / 512 Byte) EH = 128 Byte OOB (8-bit ECC / 512 Byte) |
| X | Temperature Range | I = Industrial (-40°C to +85°C) A = Industrial with AECQ and GT Grade (-40°C to +85°C) C = Commercial (-25°C to +85°C) B = Industrial Plus with AECQ Grade (-40°C to +105°C) |
| X | Packing Type | 0Tray 3 = Tape and Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive204AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeHive208S | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive304 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeProg2 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg2AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeProg2C | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg3 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
