Device: MB85RS256A (ISP)
Manufacturer: Fujitsu
Part number description for this device:
Move the cursor over the box to highlight particular section| MB | Fujitsu Semiconductor | |
| XX | Device Family | 85 = FRAM |
| XX | Interface | R = Parallel RC = Serial interface (I2C) RS = Serial interface (SPI) |
| XXXX | Density | 16 = 16kbit 64 = 64kbit 128 = 128kbit 256 = 256kbit 1001, 1002, 1M = 1Mbit 2M = 2Mbit 4001, 4002 = 4Mbit |
| X | Version | Blank A = A version B = B version |
| X | Operating Voltage | Blank = 2.7V to 3.6V or 3.0V to 3.6V T = 1.8V to 3.6V V = 3.0V to 5.5V |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
