Device: NM24C32F (ISP)
Manufacturer: Fairchild
Part number description for this device:
Move the cursor over the box to highlight particular section| XX | Company | NM, FM = Fairchild Non-volatile memmory |
| XX | Interface | 24 = IIC serial EEPROM 25 = SPI serial EEPROM 34 = IIC serial EEPROM |
| X | Technology | C = CMOS W = Whole array write protect |
| XX | Density/Mode | 00 = 512bit 020 = 2kbit, (SPI mode 0) 041 = 4kbit, (SPI mode 1) 02 = 2kbit 03 = 2kbit write protect 04 = 4kbit 05 = 4kbit with Write Protect 08 = 8kbit 09 = 08kbit with Write Protect 16 = 16kbit 160 = 16kbit, (SPI mode 0) 17 = 16kbit with Write Protect 32 = 32kbit with Write Protect 64 = 64kbit with Write Protect 640 = 64kbit, (SPI mode 0) |
| X | Process | U = Ultralite CS100UL process |
| X | SCL Clock Frequency | Blank = 100kHz F = 400kHz |
| X | Pinout | Blank = Normal pin out T = Rotated die pin out |
| XX | Voltage Operating Range | Blank = 4.5V to 5.5V L = 2.7V to 5.5V LZ = 5.7V to 5.5V and <1uA standby current |
| X | Temperature Range | Blank = 0°C to 70°C V = -40°C to 125°C E = -40°C to 85°C |
| XX | Package Type | N = DIP8 M8 = SOIC8 MT8 = TSSOP8 |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
