Device: XL93CS46 (ISP)
Manufacturer: Exel
Part number description for this device:
Move the cursor over the box to highlight particular section| XL | EXEL | |
| X | Temperature Range | Blank = Extended E = Industrial S = Commercial |
| XX | Family Descriptor | 93 = MW serial EEPROM |
| XX | Technology | C = CMOS LC = Low voltage CMOS LL = Low voltage Low power CMOS |
| XX | Density | 06 = 256bit 46 = 1kbit 56 = 2kbit 66 = 4kbit |
| XX | Voltage Range | Blank = 5V +/- 10\\\\\\\\% A = 5V +/- 10\\\\% B = 1.8 to 5.5V 1.8 = 1.8 to 5.5V |
| X | Package Type | P = PDIP 300mil RY = SOIC 150mil Y = SOIC 150mil J = SOIC8 (EIAJ) |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
