Device: AT25DF041B (ISP)
Manufacturer: Dialog Semicond.
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Designator | |
| XXXX | Product Family | 25DF = SPI serial flash memory 25DQ = SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support 25DF, 25DL, 26DF = SPI serial flash memory 25SF = SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support, 2.5V Minimum 25DN = SPI Serial Flash Memory with Dual-Read Support, 2.3V Minimum |
| XX | Devcie Density | 02 = 2Mbit 04 = 4Mbit 08 = 8Mbit 16 = 16Mbit 32 = 32Mbit 64 = 64Mbit 256 = 256kbit 512 = 512kbit 01 = 1Mbit |
| X | Interface | 1 = Serial |
| X | Device Revision | Blank A |
| XX | Package Option | S = SOIC8, 208mil SS = SOIC8, 150mil S3 = SOIC16, 300mil M = UDFN8, 6x5x0.6mm MW = VDFN8, 8x6x1mm MA = 8-pad, 2x3x0.6 mm UDFN XM = 8-lead TSSOP |
| XX | Device Grade | H = NiPdAu lead finish, industrial temp. range (-40°C to 85°C) U = Green, Matte Sn or Sn alloy, Industrial temperature range (–40°C to +85°C) |
| XX | Operating Voltage | Blank = 2.7V to 3.6V F = 2.3V to 3.6V N = 1.65V minimum (1.65V to 1.95V or 1.65V to 3.6V) D = 2.5V to 3.6V |
| XX | Shipping Carrier Option | B = Bulk (tubes) Y = Trays T = Tape and reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive208S | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2C | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
