Device: CAT27128A
Manufacturer: Catalyst (CSI)
Part number description for this device:
Move the cursor over the box to highlight particular section| CAT | Catalyst | |
| XX | Family Descriptor | 27 = OTP ROM, EPROM 28F = FLASH 29FN = Sectored FLASH 28C = Parallel EEPROM 24C = Serial EEPROM 24F = Fast Mode IIC Serial EEPROM |
| X | Technology | C = CMOS HC = High-speed CMOS LV = Low Voltage |
| XXX | Density | 001 = 1Mbit 01 = 1kbit 002 = 2Mbit 02 = 2kbit 010 = 128kx8 015 = 1.5Mbit 16 = 16kbit 64 = 8kx8 128 = 16kx8 150 = 1.5Mbit 210 = 64kx16 256 = 32kx8 512 = 64kx8 |
| XXX | Package Type | C = Sidebraze J = SOIC(JEDEC) K = SOIC(EIAJ) N = PLCC P = Plastic DIP S = SOIC(JEDEC) Non-Rotated T = TSOP(8x20) T13 = TSOP(8x13.4) T14 = TSOP(8x14) TR = Reverse TSOP D = CerDIP U = TSSOP |
| X | Temperature Range | Blank = Commercial I = Industrial M = Military A = Automotive HT = High Temperature E = Extended Automotive |
| XX | Speed(Parallel & Flash Only) | 90 = 90 ns 12 = 120 ns 15 = 150 ns 20 = 200 ns 25 = 250 ns 30 = 300 ns 35 = 350 ns |
| X | Boot Block(Flash Only) | B = Bottom T = Top |
| XX | Operating Voltage | -designation is for serial IIC, Microwire and SPI EEPROMs Blank = 2.5V to 6.0V 1.8 = 1.8V to 6.0V |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | |
| BeeHive208S | |
| BeeHive304 | adapter/module: AP3 DIL48 (73-3319) |
| BeeProg2 | |
| BeeProg2C | |
| BeeProg3 | adapter/module: AP3 DIL48 (73-3319) |
| MEMprog2 (discontinued) | |
| SmartProg2 (discontinued) |
