Device: CAT15008 (ISP)
Manufacturer: Catalyst (CSI)
Part number description for this device:
Move the cursor over the box to highlight particular section| CAT | Catalyst | |
| XXX | Product Type | 130 = Voltage supervisor with Microwire serial CMOS EEPROM 140 = Voltage supervisor with I2C serial CMOS EEPROM 150 = Voltage supervisor with SPI serial CMOS EEPROM |
| XX | Memory Density | 01 = 1kbits 02 = 2kbits 04 = 4kbits 08 = 8kbits 16 = 16kbits |
| X | Supervisor Output Type | 9 = CMOS active low 1 = CMOS active high |
| X | Reset Threshold Voltage | L = 4.50V to 4.75V M = 4.25V to 4.50V J = 3.89V to 4.10V T = 3.00V to 3.15V S = 2.85V to 3.00V R = 2.55V to 2.70V Z = 2.25V to 2.38V |
| X | Package Type | W = SOIC |
| X | Temperature Range | I = Industrial (-40°C to 85°C) |
| X | Lead Finish | G = NiPdAu (PPF) |
| XX | Packaging | T = Tape & Reel 3 = 3000 units / Reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
