Device: AT90S1200 (ISP-SPI)
Manufacturer: Atmel
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Atmel | |
| XX | Family Signature | 90 = MCU with FLASH |
| XX | Power Supply | LS = 2.7V to 6.0V S = 4.0V to 6.0V |
| XXXX | Device Number | 1xxx = 1kx8 In-System programable FLASH 2xxx = 2kx8 In-System programable FLASH 4xxx = 4kx8 In-System programable FLASH 8xxx = 8kx8 In-System programable FLASH |
| X | Speed Option | 1 = 1 MHz 4 = 4 Mbit 8 = 8 MHz 10 = 10 MHz |
| X | Packages | P = Plastic DIP S = SOP A = TQFP J = PLCC |
| X | Temperature Range | C = Commercial I = Industrial U = Industrial Green/Pb-free Z = Automotive Green/Pb-free |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
