Device: AT25080N [SOIC8]
Manufacturer: Atmel
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Atmel | |
| XX | Family Descriptor | 25 = SPI Serial EEPROM |
| XX | Technology | Blank C = CMOS HP = High speed Page write P = Page write F = Flash FS = High speed small sectored SPI Flash memory |
| XXX | Density | 01 = 1kbit 02 = 2kbit 04 = 4kbit 010 = 1kbit 020 = 2kbit 040 = 4kbit 080 = 8kbit 160 = 16kbit 320 = 32kbit 640 = 64kbit 128 = 128kbit 256 = 256kbit 512 = 512kbit 1024, M01 = 1Mbit 2048 = 2Mbit 4096 = 4Mbit |
| X | Version | Blank A B |
| X | Package Width | Blank N = Narrow (150mil) W = Wide (208mil) |
| XX | Speed Option | Blank 10 = 10 ms |
| X | Package Type | P = Plastic DIP S = SOIC T = TSSOP U = dBGA2 SS = JEDEC SOIC X = TSSOP MA = UDFN ME = XDFN C = VFBGA |
| X | Device Grade/Temperature Range | C = Std. paste containing Pb, Commercial temp. range (0°C to 70°C) I = Std. paste containing Pb, Industrial temp. range (-40°C to 85°C) U = Green (Pb/Halide-free/RoHS compliant), Industrial temp. range (-40°C to 85°C) X = Green (Pb/Halide-free/RoHS compliant), Commercial temp. range (0°C to 70°C) H = NiPdAu lead finish, Industrial temp range (-40°C to 85°C) G = NiPdAu lead finish, Commercial temp. range (0°C to 70°C) P = Green, NiPdAu lead finish, Automotive temperature range (-40°C to 125°C) Q = St. paste containng Pb, Automotive temperature range (-40°C to +125°C) |
| XX | Operating Voltage | Blank = 4.5V to 5.5V 2.7 = 2.7V to 5.5V 2.5 = 2.5V to 5.5V 1.8 = 1.8V to 5.5V M = 1.7V to 5.5V L = 1.8V to 5.5V D = 2.5V to 5.5V |
| XXXXX | Packing Type | SL735 = 500 per 7\\\\\\\\\\\\\\\'\\\\\\\\\\\\\\\' reel SL383 = Maximum of 3000 per 13\\\\\\\" reel in increments of 500, depending on package type B or Blank = Bulk (tubes) T = Tape and reel |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
| BeeHive204AP | adapter/module: AP1 SOIC8 ZIF 150mil (71-1850) |
| BeeHive208S | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
| BeeHive304 | adapter/module: AP3 SOIC8-150 (73-3458) |
| BeeProg2 | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
| BeeProg2AP | adapter/module: AP1 SOIC8 ZIF 150mil (71-1850) |
| BeeProg2C | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
| BeeProg3 | adapter/module: AP3 SOIC8-150 (73-3458) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 SOIC8 ZIF 150mil (71-1850) |
| MEMprog2 (discontinued) | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
| SmartProg2 (discontinued) | adapter/module: DIL8W/SOIC8 ZIF 150mil (70-0901) |
