Device: AT17C010
Manufacturer: Atmel
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Atmel | |
| XX | Family Signature | 17 = Serial Configuration Memory 18 = JTAG configuration memory |
| X | Technology / Voltage | C = EEPROM, 5V +/-10\\\\\\\\% LV = EEPROM, 3.3V +/-10\\\\% F = Flash, 3.3V N = N-time programmable, 3.3V |
| XXX | Density | 65 = 64Kbit 128 = 128Kbit 256 = 256Kbit 512 = 512kBit 010 = 1Mbit 002, 020 = 2Mbit 040 = 4Mbit 080 = 8Mbit 16 = 16Mbit 32 = 32Mbit |
| X | Interface Type | Blank = Xilinx A = Altera |
| XX | Speed Option | 10 = 10MHz 30 = 33MHz |
| XX | Packages | C = 8-pin LAP Leadless Array Package) P = 8-pin DIP N = 8-pin SOIC J = 20-pin PLCC S = 20-pin SOIC Q = 32-pin TQFP BJ = 44-pin PLCC TQ = 44-pin TQFP VJ = 20-pin PLCC (Virtex pinout) X = 20-pin TSSOP |
| X | Temperature Range | C = Commercial (0°C to 70°C) I = Industrial (-40°C to 85°C) U = Industrial (-40°C to 85°C), Green Pb/Halide free package |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | |
| BeeHive208S | |
| BeeHive304 | adapter/module: AP3 DIL48 (73-3319) |
| BeeProg2 | |
| BeeProg2C | |
| BeeProg3 | adapter/module: AP3 DIL48 (73-3319) |
| MEMprog2 (discontinued) | |
| SmartProg2 (discontinued) |
