Device: AM93LC56 (ISP)
Manufacturer: Anachip
Part number description for this device:
Move the cursor over the box to highlight particular section| AM | Anachip | |
| XX | Family Signature | 24 = IIC serial EEPROM 93 = MW serial EEPROM |
| XX | Technology | LC = Low voltage (2.5 to 5.5V) CMOS |
| XX | Density | 02 = 2kbit 04 = 4kbit 08 = 8kbit 16 = 16kbit 21 = 1kbit 46 = 1kbit 56 = 2kbit 66 = 4kbit 86 = 16kbit |
| X | Pinout and Temperature Range | Blank = Standard, commercial I = Standard, industrial V = Standard, automotive G = Rotated, commercial B = Rotated, industrial D = Rotated, automotive |
| X | Package Type | N = Plastic DIP8 S = SOP8 TS = TSSOP8 |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
