Device: AT45DB021D [SOIC8-200]
Manufacturer: Adesto Techn.
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Designator | |
| XXXX | Product Family | 45DB = DataFlash 25DQ = 2.7V Minimum SPI Serial Flash Memory with Dual-I/O and Quad-I/O 45DQ = DataFlash Dual/Quad I/O 25DF = 1.65V Minimum SPI Serial Flash Memory, 2.3V or 2.7V Minimum SPI Serial Flash Memory 25DL = 1.65V Minimum SPI Serial Flash Memory with Dual-I/O Support 25BCM = 2.7V Minimum SPI Serial Flash Memory |
| XX | Device Density | 512 = 512Kbit 01 = 1Mbit 02 = 2Mbit 04 = 4Mbit 08 = 8Mbit 16 = 16Mbit 32 = 32Mbit 64 = 64Mbit |
| X | Interface | 1 = Serial 2 = Dual |
| X | Device Revision | A B D E |
| XX | Package Option | SS = 8-lead, 150mil SOIC S = 8-lead, 208mil SOIC; 8-lead, 209mil wide SOIC S3 = 16-lead, 300mil wide SOIC M = 8-pad, 5x6x0.6mm UDFN; 8-pad, 6x5x1mm MLF (VDFN) MW = 8-pad, 8x6x1mm MLF (VDFN) CC = 9-ball, 3x3(1mm pitch) UBGA CN = 8-lead, 6x8mm CASON C = 24 Ball BGA U = 11-ball dBGA (WLCSP) MA = 8-pad, 2x3x0.6 mm UDFN T = 28-lead, 8x13.4mm TSOP |
| X | Device Grade | H = Green, NiPdAu lead finish, Industrial temperature range (–40°C to 85°C) U = Green, Matte Sn or Sn alloy, Industrial temperature range (–40°C to 85°C) |
| X | Operating Voltage | Blank = 2.7V minimum (2.7V to 3.6V) D = 2.5V minimum (2.5V to 3.6V) F = 2.3V minimum (2.3V to 3.6V) N = 1.65V minimum (1.65V to 3.6V) 1.65V minimum (1.65V to 1.95V) |
| XX | Binary Page Size Option | 2B = Factory set 512/256 byte binary page size option HA = Shipped in tape & reel (T&R) only with the page size set to 264 bytes. The shipping carrier suffix is not marked on the device. HC = Shipped in tape & reel (T&R) only with the page size set to 256 bytes. The shipping carrier suffix is not marked on the device. |
| X | Shipping Carrier Option | B = Bulk (tubes) T = Tape and reel Y = Trays |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL8W/SOIC8 ZIF 200mil SFlash-2a (70-1271A) |
| BeeHive204AP | adapter/module: AP1 SOIC8 ZIF 200mil SFlash-2 (71-1855) |
| BeeHive208S | adapter/module: DIL8W/SOIC8 ZIF 200mil SFlash-2a (70-1271A) |
| BeeHive304 | adapter/module: AP3 SOIC8-200 SFlash-2 (73-3160) |
| BeeProg2 | adapter/module: DIL8W/SOIC8 ZIF 200mil SFlash-2a (70-1271A) |
| BeeProg2AP | adapter/module: AP1 SOIC8 ZIF 200mil SFlash-2 (71-1855) |
| BeeProg2C | adapter/module: DIL8W/SOIC8 ZIF 200mil SFlash-2a (70-1271A) |
| BeeProg3 | adapter/module: AP3 SOIC8-200 SFlash-2 (73-3160) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 SOIC8 ZIF 200mil SFlash-2 (71-1855) |
