Device: AT25DF081 (ISP)
Manufacturer: Adesto Techn.
Part number description for this device:
Move the cursor over the box to highlight particular section| AT | Designator | |
| XX | Product Family | 25DF = SPI serial flash memory |
| XX | Device Density | 08 = 8Mbit |
| X | Interface | 1 = Serial |
| XX | Wafer Level Option | WD = Bare die WB = Bumped die, Pb-free |
| X | Die/Wafer Carrier Option | T = Tape and reel |
| XX | Die/Wafer Backrind Thickness | 20 = 20mils 11 = 11mils |
| X | Operating Voltage | N = 1.65V to 1.95V |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
