Device: S-93C46C (ISP)
Manufacturer: ABLIC
Part number description for this device:
Move the cursor over the box to highlight particular section| S | Seiko Instruments Inc. | |
| XX | Family Descriptor | 93 = Microwire Serial EEPROM |
| XX | Power Supply | C = Read/Write: 1.8V to 5.5V A = Read/Write: 2.7V to 5.5V L = Read: 1.6V to 5.5V, Write: 1.8V to 5.5V CC = Read: 1.8V to 5.5V, Write: 2.7V to 5.5V S = Read/Wrire: 4.0V to 5.5V |
| XXX | Device Density | 46 = 64x16bit 56 = 128x16bit 66 = 256x16bit 76 = 512x16bit 86 = 1024x16bit |
| X | Version | A = A-version B = B-version |
| X | Pin Assignment | Blank D = Standard R = Rotate |
| X | Operating Temperature | Blank I = -40°C to 85°C H = -40°C to 105°C OI = -40°C to +85°C OH = -40°C to +105°C OA = -40°C to +125°C OS = -40°C to +150°C |
| XX | Package Type | DP, D8 = DIP8 FJ = SOIC8 J8 = SOP8 FT, T8 = TSSOP8 MFN = MSOP8 I8 = SNT8-A K8 = TMSOP8 |
| XX | IC Direction In Tape Specification | Blank S1 = DIP8 T1 = SOP8 (JEDEC), SNT8-A, TSSOP8 T2 = SOP8 (JEDEC), TSSOP8 |
| XX | Taping Specification | Blank = for DIP TB = SOIC8, TSSOP8 |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
